Scan Mode Settings - IDTECH 2DScan FX200 Quick Start Manual

Section 5

SCAN MODE SETTINGS

⚫
Level Mode: A trigger pull activates a decode session. The decode
session continues until a barcode is decoded or you release the
trigger.
⚫
Sense Mode: The scanner activates a decode session every time it
detects a barcode presented to it. The decode session continues
until a barcode is decoded or the decode session timeout expires.
Timeout between Decodes (Same Barcode) can avoid undesired
rereading of same barcode in a given period of time. Image
Stabilization Timeout gives the scanner time to adapt to ambient
environment after it decodes a barcode and "looks" for another.
Image Change Trigger Sensitivity can change the Sense Mode's
sensibility to changes in images captured, while IR Proximity
Trigger Sensitivity can adjust the Sense Mode's sensibility in
detecting barcodes presented to the scanner.
⚫
Continuous Mode: The scanner automatically starts one decode
session after another. To suspend/resume barcode reading, simply
press the trigger. Timeout between Decodes (Same Barcode)
can avoid undesired rereading of same barcode in a given period
of time.
⚫
Pulse Mode: When the trigger is pulled and released, scanning is
activated until a barcode is decoded or the decode session timeout
expires (The decode session timeout begins when the trigger is
released).