Commissioning The Output Optical Power Of The Optical Transmitter - Huawei MA5833-BS60 Commissioning Manual

MA5833-BS60
Hardware Commissioning Guide
3
Commissioning the Output Optical Power
Step 1 Adjust the multimeter for the DC voltage test. Connect the black probe of the multimeter to
the screw on the front panel and connect the red probe to the optical power test point of the
optical transmitter to measure the DC voltage. Obtain the optical power from the following
table based on the measured voltage.
Issue 01 (2018-12-12)
NOTE
The following introduces how to use a multimeter to measure the optical power. You can also use an
optical power meter to measure the optical power.
Copyright © Huawei Technologies Co., Ltd.
3 Commissioning the Output Optical Power of the Optical
of the Optical Transmitter
Transmitter
5