Configuring Intelligent Rf Adjustment; Configuring Manual Intelligent Rf Adjustment (Ma5833-Bs60) - Huawei MA5833-BS60 Commissioning Manual

MA5833-BS60
Hardware Commissioning Guide
6

Configuring Intelligent RF Adjustment

The MA5833 supports intelligent RF adjustment. You can use the CLI or NMS to set the
following adjustment items remotely.
The downstream output power can be adjusted manually and automatically.
l
l
Only manual adjustment is supported in the upstream direction. You can directly set the
attenuation and equalization values in the upstream direction of the frequency mixer.

6.1 Configuring Manual Intelligent RF Adjustment (MA5833-BS60)

6.2 Configuring Automatic Intelligent RF Adjustment (DOCSIS 3.1)
This topic describes how to configure automatic intelligent radio frequency (RF) adjustment
on the command-line interface (CLI), to provide expected output signal transmit power for the
device based on the configuration and automatically adjust the equalization and attenuation
values. This topic is applied to DOCSIS 3.1 device.
6.3 Configuration Example (Automatic Adjustment, DOCSIS 3.1)
This topic describes an example for configuring automatic intelligent radio frequency (RF)
adjustment. This topic is applied to DOCSIS 3.1 device.
6.4 Configuration Example (Manual Adjustment, MA5833-BS60)
This section provides an example to describe how to manually adjust RF.
6.1 Configuring Manual Intelligent RF Adjustment
(MA5833-BS60)
This topic describes how to manually adjust the equalization and attenuation values of
upstream and downstream signals for a combiner.
Issue 01 (2018-12-12)
In automatic adjustment, the expected output power of an RF port needs to be configured
first. Then, the system measures the actual output power of the RF port and
automatically adjusts the attenuator and equalizer of the combiner.
In manual adjustment, the attenuator and equalizer of the combiner can be configured
directly.
NOTE
l One of these two adjustment modes can be used in actual configurations.
l It is recommended that you use the manual adjustment mode.
Copyright © Huawei Technologies Co., Ltd.
6 Configuring Intelligent RF Adjustment
16