Adding/Changing Coolant - Grizzly T30943 Owner's Manual

Adding/Changing
Coolant
A small amount of coolant will be lost dur-
ing normal operations. As the coolant runs
low, it will have to be replaced. We recom-
mend changing the coolant every three
months. However, be sure to follow the
manufacturer's instructions when adding
or changing the coolant.
Cutting oil/coolant is available from Grizzly
(see Pages 20–21).
Adding Coolant
Items Needed
New Coolant ..............................As Needed
Shop Rags .................................As Needed
To add coolant:
1. DISCONNECT TOOL FROM POWER!
2. Place tool on flat, stable surface and
ensure coolant valve is in OFF position
(see Figure 25).
3. Remove lid from coolant bottle (see
Figure 25), and re-fill bottle with new
coolant.
Breather
Lid
Bottle
Coolant
Valve
Hose
Figure 25. Coolant system components.
Model T30943/T30944 (Mfd. Since 10/19)
4. Replace lid on coolant bottle. Ensure
Changing Coolant
Items Needed
New Coolant ......................................18 oz.
Shop Rags .................................As Needed
1 Gal. Bucket ............................................ 1
To change coolant:
1. DISCONNECT TOOL FROM POWER!
2. Place tool on flat, stable surface.
Qty.
3. Press down on blue quick-release disc
4. Position coolant hose over bucket, lift
5. When bottle (see Figure 25) is empty,
6. Remove lid from coolant bottle, re-fill
90˚ Elbow
lid is secure and that breather valve is
pressed down.
Ensure coolant valve (see Figure 25)
is in OFF position, and breather valve
on bottle is pressed down.
(see Figure 25) on 90˚ elbow and
remove coolant hose.
breather valve (see Figure 25) on
bottle, and turn coolant valve to ON
position to let coolant drain into bucket.
turn coolant valve to OFF position,
press breather valve down, and press
coolant hose firmly into 90˚ elbow.
bottle with new coolant, and re-install
lid.
Qty.
-23
-