Setting The Time (Time); Synchronisation Of The Clock On/Off (Autosync) - Blaupunkt QUEENS MP56 7 646 583 310 Operating Instructions Manual

Changing basic settings in the settings menu
Setting the time ( TIME)
➔
Press the softkey
"TIME").
The current time is shown on
the main line
fl ash.
➔
On the rocker switch
or to change the hours.
➔
On the rocker switch
to change to the minutes.
The minutes fl ash.
➔
On the rocker switch
or to change the minutes.
➔
Press the OK button
ish the input and to save the
time.
Note:
To quit the input without
changing the time, press the
@
ESC button
Switching the time display on/
off with switched-off device
( OFFCLOCK)
The time can be displayed while
the device is switched off, if the
vehicle ignition is switched on. To
switch this time display on/off:
➔
Press the softkey
"OFFCLOCK").
•
"SHOW CLOCK": The time
display is switched on.
•
"HIDE CLOCK": The time dis-
play is switched off.
118
7
(next to
A
. The hours
3
, press
3
, press
3
, press
A
to fi n-
.
8
(next to
Switching the RDS synchronisa-
tion of the clock on/off ( AUTO-
SYNC)
The clock can automatically be
synchronised with the RDS time
signal, provided that a station is
set that broadcasts this RDS time
signal.
➔
Press the softkey
"AUTOSYNC").
•
"AUTOSYNC ON": The syn-
chronisation is switched on.
•
"AUTOSYNC OFF": The syn-
chronisation is switched off.
Switching the 24-hour time dis-
play on/off ( 24H MODE)
The time can be displayed using
the 12-hour or 24-hour format.
To switch between these two for-
mats:
➔
Press the softkey
"24H MODE").
•
"24H MODE ON": The 24-
hour format is switched on.
•
"24H MODE OFF": The 12-
hour format (AM/PM) is
switched on.
<
(next to
;
(next to