Adjusting The Interference- Dependent Treble Reduction (High Cut); Switching Mono Playback On/Off (Fm Only); Switching The Display Of Radio Text On/Off; Setting The Scanning Time (Scan Time) - Blaupunkt Bremen MP78 Manual

Cancelling the scan and continuing to
listen to a station
u Press the OK button B.
Scanning stops and the radio continues
playing the station that it tuned into last.
Adjusting the interference-
dependent treble reduction
(High Cut )
The High Cut function causes a reduction of
the interferences during poor radio recep-
tion. If reception interferences are present,
the interference level is automatically re-
duced.
To adjust High Cut,
u press the TUNER button ?.
The "Tuner" menu is displayed.
u Press the NEXT button 2.
u Press the "High Cut" softkey 9 repeat-
edly until the desired setting appears
on the display.
"High Cut 0" means that no automatic re-
duction of the interference level will be
made; "High Cut 2" means that a maximum
reduction will be made.
u Press the OK button B.
Switching mono playback on/off
(FM only)
In case of poor radio reception, switching
from stereo to mono playback can reduce
interferences.
To switch the mono playback on or off,
u press the TUNER button ?.
The "Tuner" menu is displayed.
u Press the NEXT button 2.
To switch mono on or off,
u press the "Mono" softkey ;:
• : Mono is switched on.
• : Mono is switched off.
To save the setting,
u press the OK button B.
Note:
Every time the device is switched off
and on again, mono is automatically
switched off and the playback uses
stereo again.
Switching the display of radio
text on/off
Note:
This function is not available in the tun-
er region "THAILAND".
Some stations use the RDS signal to broad-
cast scrolling texts known as radio texts.
To switch the display of radio text on or off,
u press the TUNER button ?.
The "Tuner" menu is displayed.
To switch radio text on or off,
u press the "Radio Text" softkey ;:
• : Radio text is switched on.
• : Radio text is switched off.
To save the setting,
u press the OK button B.
Setting the scanning time
(Scan Time)
Press the MENU button A.
u
u Press the NEXT button 2.
u Press the "Various Settings" ;
softkey.
Radio mode
111