Storing Stations; Listening To Stored Stations - Blaupunkt QUEENS MP56 7 646 583 310 Operating Instructions Manual

Storing stations

After locating a station, you can
store it as follows:
➔
Select the desired memory
bank (see page 85).
➔
Press the softkey for approx.
two seconds to which you
want to assign the station.
The station is stored. A signal
tone confi rms that the station
has been stored. The frequency
or the name of the station
is displayed next to the softkey.
The current station is high-
lighted.
Note:
To automatically search for
FM stations and store them
in the FMT memory bank, see
"T-STORE" on page 90.

Listening to stored stations

➔
Select the desired memory
bank (see page 85).
The tuner display displays the
frequencies or names of the
C
six stations
7
softkeys to
ry bank.
➔
Briefl y press the softkey which
is assigned to the station you
want to set up.
The frequency or the name of
the current station is indicated.
C
assigned to the
<
in this memo-
The selected station is played
back provided that it can be
received at the current vehicle
position.
The station name or the fre-
quency of this station appears
on the main line
tion provides this RDS informa-
tion. In addition, the memory
location of the radio station
is highlighted.
Scanning all receivable
stations (SCAN)
➔
Select the waveband (FM, MW,
LW) whose receivable stations
you want to scan (see page 89).
➔
Press and hold the OK button
A
for approx. two seconds.
The tuner searches for stations
in the current waveband. The
A
main line displays "SCAN"
every two seconds.
As soon as the tuner has locat-
ed a station, it is played and
the station name or the station
frequency appears on the main
A
line . The scan time can be
set as described on page 121
and 122 under "SCANTIME".
After the frequency band has
been completely searched
once, the search stops and the
station located last is played
back.
Operating the tuner
A
if the sta-
C
87