Setting The Scanning Time; Setting The Display; Cassette Mode; Cassette Play - Blaupunkt Daytona Beach C34 Operating And Installation Instructions

RADIO MODE
Ending SCAN, continuing to listen
to a station
➮
Press the MENU button 8.
The scanning process is ended, the
station last scanned remains active.

Setting the scanning time

➮
Press the MENU button 8.
➮
Press the fi button 7 repeatedly
until "SCAN TIME" appears on the
display.
➮
Use the @ # buttons 7 to set the
desired scanning time.
When you have finished making your
changes,
➮
press the MENU button 8 twice.
Note:
The set scantime also applies to
G
scanning in Cassette and CD
changer mode.

Setting the display

You can choose to continuous display
one of the followings:
Time
G
Frequency
G
➮
Hold down the
until the desired display appears on
the display.
DIS button 6

CASSETTE MODE

Cassette Operation

Cassette Play

If there is no cassette in the device
G
➮
button 1.
press the
The flip-release panel opens.
➮
Insert the cassette into the cassette
slot with the open side to the right.
➮
Close the control panel.
The cassette starts playing with the side
that is facing upwards.
If there is already a cassette in the
G
device and it is playing Radio or
CD changer (AUX) mode.
➮
Press the SRC button : until
"CASSETTE" appears in the
display.
The cassette is played in whichever
direction was last selected.

Cassette Ejection

➮
button 1.
Press the
The flip-release panel opens.
➮
Press the 0 button ; located beside
the cassette slot
➮
Remove the cassette and close the
release panel
or
➮
Insert a new cassette and close the
release panel.
13