Adjusting The Volume; Muting The Device; Operation With Telephone - Blaupunkt QUEENS MP56 7 646 583 310 Operating Instructions Manual

General functions
When connecting a hard disk,
please note that the maximum
current load on the USB port
must not exceed 800 mA.

Adjusting the volume

WARNING!
Danger from excessive
volume!
Excessive volume can damage
your hearing and you may fail to
hear acoustic warning signals!
➔
Do not increase the volume
while the device changes the
CD in the CD changer or the
audio source.
➔
Always set the device to a
moderate volume.
➔
Turn the volume control
The current volume is shown
in the central area
display and used for all audio
sources.
Note:
To preset the volume of traffi c
announcements (TRAFFIC), a
connected telephone (PHONE)
and the signal tone (BEEP), see
pages 115 and 116.
76
5
.
B
of the

Muting the device

The device can be muted as fol-
lows:
➔
Briefl y press the On/Off but-
4
ton .
The display shows "MUTE".
To cancel the mute function:
➔
Briefl y press the On/Off but-
4
ton again or turn the volume
5
control .

Operation with telephone

If a hands-free system is installed
in your vehicle or your cell phone
is connected to the device via a
Bluetooth adapter, the device re-
sponds as follows to incoming or
outgoing telephone calls:
•
The voice of the person calling
you is played back via the loud-
speakers of the vehicle.
•
The display shows "PHONE
CALL".
•
The currently playing audio
source is muted.
•
During the telephone call, you
change the volume of the tele-
phone call by means of the vol-
5
ume control
•
Traffi c announcements (TA) are
not automatically shown.
.