Adjusting The Shoulder Belts - CYBEX ATON CBX User Manual

Hide thumbs Also See for ATON CBX:

Table of Contents

Available languages

Enlarged version

ADJUSTING THE SHOULDER BELTS

Note! Only if the shoulder belts (3) are adjusted correctly optimum

security can be provided.

• When the baby is approximately 3 months the seat insert can be

removed to provide enough space for the child (see page 33).

• The height of the shoulder belts (3) must be adjusted in such

a way that they run through the belt slots (4) directly above the

baby's shoulders.

To adjust the height of the shoulder belts (3) please follow the next

steps:

• Press the red button to open the buckle (5).

• Pull the shoulder pads (6) over the belt tongues (7) to remove

them.

• First pull one buckle tongue (7) through the cover and out of

the belt slot (4). Now insert it again through the next higher slot.

Repeat this step to the adjust the other side as well.

Note! Please make sure that the shoulder belts (3) are not twisted

ни

but should lie flat against the main seat, run evenly through the belt

5).

slots (4) and down to the buckle (5).

Table of Contents