Conference And Tandem Calls; Standard Telephones And/Or Voice Mail Auto Attendant Devices - Toshiba Strata CT User Manual

Features

Conference and Tandem Calls

Standard Telephones and/or Voice Mail Auto Attendant Devices

Strata CT enables you to participate in a variety of conference calls:
Up to four stations (including your own) may be conferenced on internal lines.
Up to three stations (including your own) may be conferenced with one Exchange line.
Up to two stations (including your own) may be conferenced with two Exchange lines.
Step 1: Make a Conference Call or Tandem Two Exchange Lines
1. While on either an external
call or internal call, flash the
hookswitch or press your
recall button.
2. (Optional) If you want to
add an outside line, dial the
Exchange line access code;
otherwise proceed to Step 3.
3. Dial the telephone number
that you want to add to the
call.
4. If you hear a single tone,
voice announce the call and
ask the party to pick up
...or, if you hear ringing,
announce the call once the
party answers
...or, if the called station is
busy, you can flash the
hookswitch or press your
recall button to return to the
existing call.
Strata CT Standard Telephone User Guide November 2001
You hear internal dial tone and the call is placed on hold.
You will not hear the held party again until Step 4.
See Table 1 on page 36
You hear dial tone when the line is accessed. (Up to two
Exchange lines can be conferenced.)
On internal calls, the new party must pick up the handset
or press a [PDN] button to participate in a conference call.
Note If a called external number is busy, you must hang
up and re-initiate the call.
Conference and Tandem Calls
for Exchange line access codes.
19