Answering Calls; Account Code Calls; Forced Account Codes - Toshiba Strata CT User Manual

Account Code Calls

4. Press
the call
...or to enter a subaddress, press
enter the subaddress, then press

Answering Calls

When your telephone rings,
lift the handset and speak.
Account Code Calls
Account Codes are used for a variety of reasons, including billing, call tracking, and line restriction
applications. The system records the Account Codes and can print them with other call details on a
Station Message Detail Recording (SMDR) report.

Forced Account Codes

Some applications may require that you enter an Account Code, called a Forced Account Code,
before dialling a telephone number. Forced Account Codes can be recorded for outgoing calls only.
To record a forced account code
1. Lift the handset.
2. Dial an Exchange line
number access code.
3. Enter the Forced Account
Code.
4. Dial the telephone number.
4
##
to enable the system to dial
#
,
#
.
The internal ring pattern is one second ON, three seconds
OFF—for incoming outside calls.
You are connected to the calling party.
You hear dial tone.
See Table 1 on page 36. The Exchange line accessed must
be set to require a forced Account Code in system
programming.
You hear dial tone after you press the last digit of a valid
account code or busy tone after you press the last digit of
an invalid code.
Strata CT Standard Telephone User Guide November 2001
Features