Toshiba Strata CT User Manual page 28

Conference and Tandem Calls
5. If you are ringing an internal
party, flash the hookswitch
or press your recall button
after the party answers
...or if you are ringing an
outside line, you can flash
the hookswitch or press your
recall button before or after
the party answers.
Step 2: (Optional) Add More Callers to a Conference or Tandem Call
For Conference calls: repeat
substeps 1~4 of
"Make a Conference Call or
Tandem Two Exchange
Lines"
to the conference.
...or for Tandem calls:
hookflash or press recall
again and hang up.
Step 3: (Optional) Pick Up a Tandem Exchange Line Call
This step enables you to pick up a tandem Exchange-to-Exchange line call that was
Note
established from your telephone.
Go off-hook and dial
#5#79
20
Step 1:
to add another party
.
All parties are conferenced.
If only your telephone is connected with two parties on
external Exchange lines, you can exit the conference by
hookflashing or pressing recall again before you hang up.
(See "(Optional) Add More Callers to a Conference or
Tandem Call" on Page
connected.
While a conference is being set up, all outside parties are
held separately and cannot converse with each other.
If one of the stations hangs up on a two-station/two
Exchange line conference call, the remaining station
maintains the conference.
If only your telephone is connected with two parties on
external Exchange lines, you can exit the call to allow the
two external parties to continue talking.
If your telephone has established more than one tandem
call, the call with the lowest line number is picked up.
Strata CT Standard Telephone User Guide November 2001
20.) The external lines remain
Features