Removing Transport Locks - Hanseatic 5022IE2.323eEHiTaDJW User Manual

6. Use a metal detector to make sure there
are no cables or piping in the area to be
drilled. If there are, select another location
for assembly.
7. Drill a dowel hole in each marked posi-
tions using a masonry drill.
8. For solid walls: Place the supplied dowels
into the holes. Screw the tilt protection
tight with the supplied screws.
For drywalls: Obtain suitable special dow-
els for the wall. If necessary, consult a
professional.
Screw the tilt protection to the wall with
suitable screws for the dowels.
9. Slide the cooker into place and check
that the tilt protection prevents the oven
from tilting forwards.
Make any adjustments necessary.
Positioning

Removing transport locks

• If you have not already done so, remove
any plastic strips from the sides of the
baking sheets.
• Remove all protective films.
Page EN-33