7. Wired Communication
The RigRat has three ports for external communication. They are labeled:
Serial (not intended to be used in explosive atmospheres)
Switch
4-20mA IN
Serial (Not Intended To Be Used In Explosive Atmospheres)
The Serial port is designed to be the interface point with an option RAEMet meteorological sensor.
Pins
Pin A
VCC
Pin B
CS
Pin D
RX
PIN E
GND
Pin F
TX
Others
Note: Refer to RAEMet Sensor Installation (page 60) for details on connecting to a RAEMet Sensor.
BW RigRat User's Guide
Power output, rated 4VDC
Chip select, output
UART port, output
Ground
UART port, input
Reserved
37