Manual Alarms Test - Honeywell BW RigRat User Manual

Type Red LED
Battery low
Warm up
Cal Fail
Bump Fail
Cal Due
Bump Due
Datalog Full
Network Lost
Compliance
Network Action
Program/Menu/Configuration Mode
Type Red LED Yellow LED
Program mode 1 beeps/s
Hardware test Hardware Hardware test
test pattern pattern
Device Startup
Type Red LED
Startup Startup pattern

Manual Alarms Test

Under Normal Operation Mode and non-alarm conditions, the buzzer (audible alarm) and visible
alarms can all be tested anytime by turning off the instrument or bump testing the instrument. If any
BW RigRat User's Guide
Yellow LED Green
LED
1 beeps/s
1 beeps/s
Reverse Confidence
IntelliFlash beep
Reverse Confidence
IntelliFlash beep
Reverse Confidence
IntelliFlash beep
Reverse Confidence
IntelliFlash beep
Reverse Confidence
IntelliFlash beep
Reverse Confidence
IntelliFlash beep
IntelliFlash Confidence
beep
1 beep 200ms
Green LED
Hardware test
pattern
Yellow LED Green LED
Startup pattern Startup pattern
Buzzer LCD Display
Battery low icon
"Sensor
warming up"
screen
Cal error icon at
bottom of screen
Bump error icon
at bottom of
screen
Cal error icon at
bottom of screen
Bump error icon
at bottom of
screen
Network error
icon
Show network
icon
Buzzer LCD Display
In menu or
configuration
screens
Hardware test
pattern
Buzzer LCD Display
Startup pattern
63
Reading Notes
threshold is
temperature
compsensated
under 0 deg
Datalog
memory is full
When device is
in compliance
state
Reading Notes
For bump/cal
operation,
changing
configuration
Reading