Honeywell BW RigRat User Manual page 39

Matched plug (P/N: 400-4105-014)
For hazardous applications, the system should meet these parameters:
Uo ≤ Ui
Io ≤ Ii
Po ≤ Pi
Co ≥ Ci + Ct
Lo ≥ Li + Lt
Uo/Io/Po/Co/Lo are IS barrier output parameters;
Ui/Ii/Pi/Ci/Li are RigRat input parameters;
Ct/Lt are extension cable additional parameters.
RigRat switch port IS parameters:
Ui=30V
Ii= 100mA
Pi=0.75W
Ci=1.1nF.
Li=0uH
BW RigRat User's Guide
SWITCH pins definition
PIN A NO1
PIN B COM1
PIN H NO2
PIN J NO3
PIN M COM2
PIN N COM3
Others Reserved
39
Solid-state relay 1, NO
Solid-state relay 1, COM
Solid-state relay 2, NO
Solid-state relay 2, COM
Solid-state relay 3, NO
Solid-state relay 3, COM