Operator's Hint Setting - Toshiba SL-5300 Series Owner's Manual

14. PROGRAMMING MODE
Item
Selecting the all satellites
Cancelling the all satellites
Starting the DLL

14.20 Operator's Hint Setting

You can set the hint or message for the operator that can be linked to the PLU data and displayed on
the operation panel. The programmed messages can be used in various ways, such as an operational
help, sales promotion, etc.
The following screen will appear when the [Operator's Hint] key of the Programming Mode Main
Menu is touched.
Hint No. area
SORT key
Touch the [ALL SATELLITES] key.
Touch the [CANCEL] key.
1. Touch the [DLL] key.
2. When completed, touch the [BACK] key.
NOTE: During the DLL, the message "Now in process of DLL" is displayed.
When the DLL is completed, "DLL COMPLETED" is displayed.
When failed, "ERROR OCCURRED (ERROR ID# COLORED RED)" is
displayed. In this case, retry. If the DLL failed again, contact your nearest
TOSHIBA TEC service representative or sales agent.
SEARCH CODE key
Procedure
COPY key
ADD key
14-58
EO1-31009
14.20 Operator's Hint Setting
ALL Satellites key
CHANGE CODE key
DELETE key