Toshiba SL-5300 Series Owner's Manual page 41

14. PROGRAMMING MODE
Item
Auto Code,
UPC
Unit price
Unit price flag
Mode flag
To set the auto code:
1. Touch the Auto code area.
2. The auto code setting screen will appear.
3. Input an Auto code (max. 6 digits).
4. Touch the [Decision] key.
To set the UPC:
1. Input a UPC (max. 6 digits).
2. Touch the UPC area.
NOTES:
1. Default: 000000
2. When the auto code has been entered, the UPC will become the same
number with the auto code.
3. When asterisks (*) are included in the auto code, the input code for UPC
can displace them, selected from the lowest digit. See the examples below.
Example 1: Auto code = 123***, Input code for UPC = 6543
Example 2: Auto code = 98**54, Input code for UPC = 0211
1. Input a 4-digit number.
st
2. Touch the "1 Price" area.
nd
NOTE: The 2 Price cannot be used at present.
In case of the lb scale (US model):
Select "per 1lb", 'per 1/2 lb", or "per 1/4lb".
In case of the kg scale (CA model):
Select "per 1kg" or "per 100g".
NOTE: Only "per 1kg" is selectable unless the initial settings are changed.
When "per 100g" is required, please contact the nearest TOSHIBA TEC
service representative or sales agent.
Select "WEIGH", "FIX", or "BY-COUNT".
NOTE: When "BY-COUNT" is selected, the "PIECES" area will need a
numeric data. Input the number for the "PIECES" area.
14- 6
Procedure
Decision key
EO1-31009
14.2 PLU Data Setting
Asterisk key