Toshiba SL-5300 Series Owner's Manual page 84

14. PROGRAMMING MODE
Procedure
Item
Adding a new idiom
Selecting an idiom No. and
editing the idiom
Searching an idiom No.
Copying the idiom
Deleting an idiom
Changing the idiom No.
NOTE: When the already existing idiom No. is input for the copy or No. change operation, a beep tone
sounds and an error message is displayed. Overwrite ([GO] key) or cancel ([Cancel] key) the
operation.
14.15 Confirmation Label Setting
You can print the commodity name, bar code, packed on date, PLU No. unit price, and address of the
specified PLU. It is useful to confirm the settings or register the PLU data into a POS terminal by
reading the bar code printed on the label.
Example
Bar code (Weight = 100,
Price = Unit Price)
PLU No.
Address
NOTES:
1. Bar code and address are not printed if they have not been set to "PRINT ON". (Refer to Section
16.1.1.)
2. Each print item's print position conforms to the label format setting. (Refer to Section 15.2.)
1. Input a new idiom number. (1 – 99)
2. Touch the [ADD] key or a vacant idiom No. area.
3. The Edit screen will appear.
1. Touch the idiom No. area to select.
2. Touch the same idiom No. area again to edit the idiom (max. 20
characters).
1. Input the idiom No. you desire to search.
2. Touch the [SEARCH CODE] key.
1. Touch the idiom No. area of copy source.
2. Input the idiom No. of copy destination.
3. Touch the [COPY] key.
1. Touch the idiom No. area to be deleted.
2. Input the idiom No. to be deleted.
3. Touch the [DELETE] key.
1. Touch the idiom No. are to be changed.
2. Input a new idiom No.
3. Touch the [CHANGE CODE] key.
14-49
Procedure
Commodity Name
Packed on Date
Unit Price
EO1-31009
14.15 Confirmation Label Setting