Toshiba SL-5300 Series Owner's Manual page 103

15. SET UP MODE
Key Functions
Key
HOME
NEXT ITEM/
LAST ITEM
ROTATION
FORMAT PRINT
Procedure
Item
Changing the type No.
Showing the Type
Explanation screen
Changing X or Y position
Setting the number of lines
for the Ingredient
Setting the logo print size
Used to restore the print item to the initial position.
Used to fine adjust the print position. One touch of these keys causes 0.125
mm change.
Used to select the item to be adjusted.
Used to change the rotation of the print item. One touch of this key causes the
print item to turn clockwise by 90 degrees. When the print item cannot be
rotated, a buzzer sounds.
Used to print the label format displayed on the format image area.
1. Input a type number.
2. Touch the Type area.
NOTE: When an improper number is input, a buzzer sounds or an error
occurs. The effective type number depends on the format No. or Item.
1. Touch Explanation area.
2. The print item's format list is shown. (Refer to the Format Type List
screen.)
NOTE: The format type can be changed from this list. When changed, the
type No. is also changed accordingly.
1. Input a value.
2. Touch the X or Y area.
Or,
1. Touch the location on the screen where you desire to position the
print item.
NOTE: Programmable value range depends on the format No. or Item.
(Unit: 0.125 mm)
1. Input a value. (Max. 38 lines)
2. Touch the Line ct. area.
NOTE: The acceptable value depends on the label size.
1. Input a value.
2. Touch the X or Y area.
NOTE: Regarding the logo print size, refer to Section 14.2.
Function
Procedure
15- 8
EO1-31009
15.2 Label Format Setting