Toshiba SL-5300 Series Owner's Manual page 62

14. PROGRAMMING MODE
Key Functions
Key
SORT Used to defragment the data in the flash ROM.
Since this machine uses the flash ROM, repeated data input may disable the data
entry in spite of sufficient memory capacity.
appear.)
When the [SORT] key is touched, the confirmation screen will appear. To execute,
touch the [GO] key, or [CANCEL] key to cancel.
It takes a while to complete the data sort.
SEARCH CODE Used to search the desired Recipe No. and display it on top of the list.
ADD Used to add a new recipe.
COPY Used to copy the data to other Recipe No.
DELETE Used to delete the desired Recipe No.
CHANGE CODE Used to change the Recipe. No.
Procedure
Item
Adding a new recipe
Selecting the Recipe No.
and editing the recipe.
Searching a Recipe No.
Copying Recipe
Deleting the Recipe
Changing the Recipe No.
NOTE: When the already existing Recipe No. is input for the copy or No. change operation, a beep tone
sounds and an error message is displayed. Overwrite ([GO] key) or cancel ([Cancel] key) the
operation.
1. Input a new Recipe No. (0 – 1000)
2. Touch the [ADD] key.
1. Touch the Recipe No. area.
2. Touch the same Recipe No. area again to edit the recipe.
3. Enter a recipe data on the edit screen. (max. 54 characters x 38 lines)
1. Input a Recipe No. you desire to search.
2. Touch the [SEARCH CODE] key.
1. Touch the Recipe No. area of copy source.
2. Input the Recipe No. of copy destination.
3. Touch the [COPY] key.
1. Touch the Recipe No. area to be deleted.
2. Input the Recipe No.
3. Touch the [DELETE] key.
1. Touch the Recipe No. area you desire to change.
2. Input a new Recipe No.
3. Touch the [CHANGE CODE] key.
14-27
Function
("Memory not enough error" will
Procedure
EO1-31009
14.6 Recipe Setting