Wireless Lan Status Check - Toshiba SL-5300 Series Owner's Manual

15. SET UP MODE

15.7.2 Wireless LAN Status Check

You can check the status of the wireless LAN.
The following screen will appear when the [STATUS] key of the Wireless LAN screen is touched.
PING key
Key Functions
Key
PING
RELOAD
Procedure
Item
Checking the status
NOTE: When the [PING] key is touched, the host network device set in diagnostic mode is detected.
Used to make a communication check.
Used to resend the status data.
1. Touch the [PING] key.
2. The result will be shown by OK or NG. See NOTE below.
Function
Procedure
15-51
EO1-31009
15.7 Wireless LAN
RELOAD key