Toshiba SL-5300 Series Owner's Manual page 25

9. OPERATION PANEL
(1) Preset tare lamp:
(2) Tare:
(3) Weight:
(4) BACK key:
(5) Commodity:
(6) Unit price:
(7) Total price:
(8) Speed keys:
(9) Function keys:
(10) Scale mode:
(11) Operating mode:
(12) Date and Time
(13) AUTO/MANUAL lamp:
(14) PREPACK (tare) lamp:
(15) NET lamp:
(16) PREPACK (Unit Price) lamp:
(17) ZERO lamp:
NOTE: With the initial settings, PLU preset tare function cannot be used. If you desire to use this function,
please contact the nearest TOSHIBA TEC service representative or sales agent.
Lights when a tare preset to the PLU is called. (See NOTE.)
Max. 4-digit tare is displayed.
Max. 5-digit weight including " " mark is displayed.
Used to return to the previous screen.
A commodity name is displayed.
Max. 4-digit unit price is displayed.
Max. 5-digit total price is displayed.
You can freely program these keys by SFKC setting.
You can freely program these keys by SFKC setting.
Current state of the scale is displayed (Weigh/By-count/Fix).
Current operating mode is displayed (REG. NORMAL (Label)/REG. MARK
DOWN/REG. REWRAP).
The current label issue method is displayed.
Lights when the called PLU data or tare is retained.
Lights when a tare is entered. In this case, a net weight will be displayed
on the Weight area.
Lights when the called PLU data is retained.
Lights when a tare is not set or nothing is placed on the platter (weight is
zero).
9- 3
EO1-31009
9.3 Layout of the Operation Panel