Intended Use; Before First Use - Westfalia 82 72 59 Instruction Manual

Intended Use

 The transfer hand pump has been designed for extracting and
transferring liquids, such as water, gasoline, frost protection
agent, etc. from one container to another. The pump must not
be used for drawing or transferring of food or other materials.
 The intended use also includes an operation following the
operating instructions.
 Any use beyond these parameters (different media, applying
force) or any changes (reconstruction, no original accessory)
can lead to serious risks and is regarded as use that is contra-
ry to the intended purpose.

Before first Use

Remove all parts of the transfer hand pump out of the packaging
and check them for damage in transit. Keep packaging materials
out of reach of children. There is a risk of suffocation.
Using
1. Connect the intake hose (2) with
the intake port IN (1) of the pump.
2. Connect the discharge hose (8)
with the discharge port OUT (7) of
the pump.
3. Make sure the hose connections
are tightly connected. Make sure
that the front cap (6) and the end cap (4) are properly con-
nected to the pump tank (5). Before each use check the whole
system for leakages.
4. Insert the free end of the intake hose into the container or tank
you want to extract fluids from. Feed the hose in until if bot-
Using
7