Westfalia 82 72 59 Instruction Manual page 12

toms up in the container.
5. Insert the discharge hose into the target container. Make sure
that container's volume is sufficiently dimensioned to take the
transferred liquid. The target container should be located be-
low the source container.
6. Pull the plunger handle (3) out of the pump tank (5). The fluid
is transferred via the intake hose from the source container
into the pump tank.
7. Push the plunger handle back in the pump tank. The fluid is
transferred via the discharge hose from the pump tank into the
target container.
8. Repeat steps 6 and 7.
9. After use clean the pump and the hoses as described in the
chapter "Cleaning".
Cleaning
 Before cleaning the pump, make sure the hoses and the pump
tank are completely empty.
 After each use, rinse the pump and the hoses thoroughly with
water or cleaning agent according to the processed fluid.
 Store the pump indoors in a dry place that is protected from
corrosion, dust, dirt and extreme temperatures.
 Store the pump out of reach of children.
Using
8