Removing The Freezer Drawer; Remove The Base Grille - GE GFMS2KEBSS Owner's Manual

REMOVING THE FREEZER DRAWER

The freezer drawer can be removed, if needed,
to fit through tight areas.
Read these instructions completely and carefully.
REMOVE THE BASKET
1
Open the freezer drawer until it stops.
A
The freezer basket rests on a frame inside the
B
freezer drawer. Lift the basket up at the back.
Lift the front up and lift the entire basket up
C
and out of the drawer.
REMOVE THE DRAWER FRONT
2
Remove the screw on each side of the railing.
A
Installation Instructions
A
Screw
(on some models)
REMOVE THE DRAWER FRONT
2
Lift up on both sides of the freezer drawer
B
handle to separate the drawer railings from
the rail assemblies.
C Set the drawer front on a non-scratching
surface.
D Push the rail assemblies back into locking
position.
Drawer
Rail Assembly
Assembly

REMOVE THE BASE GRILLE

3
(if needed)
If, after removing the freezer drawer and
refrigerator door, the refrigerator will still not
fit through a doorway, the base grille can be
removed.
Remove the base grille by removing the
A
screws.
62
(cont.)