Removing The Freezer Drawer - GE PFSF2MJY - Profile: 22.2 cu. Ft. Refrigerator Owner's Manual And Installation Instructions

REMOVING THE FREEZER DRAWER

The freezer drawer can be removed, if needed,
to fit through tight areas.
Read these instructions completely and carefully.
REMOVE THE BASKET
1
Open the freezer drawer until it stops.
A
The freezer basket rests on a frame inside the
B
freezer drawer. Lift the basket up at the back.
C Lift the front up and lift the entire basket up
and out of the drawer.
REMOVE THE DRAWER FRONT
2
FROM THE SLIDES
Remove the screw on each side of the railing.
A
Installation Instructions
A
Screw
REMOVE THE DRAWER FRONT FROM
2
THE SLIDES
(cont.)
Lift up on both sides of the freezer drawer
B
handle to separate the drawer railings from
the rail assemblies.
C Set the drawer front on a non-scratching
surface.
D Push the rail assemblies back into locking
position.
Drawer
Rail Assembly
Assembly
REMOVE THE BASE GRILLE
3
(if needed)
If, after removing the freezer drawer and
refrigerator door, the refrigerator will still not
fit through a doorway, the base grille can be
removed.
Remove the base grille by removing the screws.
A
22