Door Handle - GE GFMS2KEBSS Owner's Manual

REMOVE THE FRESH FOOD
6

DOOR HANDLE

(For placement in the installation location
or reversal of the handles – on some
models)
Stainless steel (on
some models):
REMOVING
A
THE DOOR
HANDLE: Loosen
the set screws
with the 3/32ʺ
Allen wrench
and remove
the handle.
NOTE: For
Double Door
models follow
the same
procedure on
the opposite door.
Plastic handle
(on some models):
REMOVING THE DOOR HANDLE: Depress the
A
tab on the underside of the handle and slide
the handle up and off of the mounting
fasteners.
REVERSING THE
DOOR HANDLE
(on some
models):
• Remove
the handle
mounting
fasteners with
a 3/16ʺ Allen
wrench and
Mounting
transfer
Fasteners
the handle
mounting
fasteners to
the right side.
• Remove the logo badge.
• Remove and transfer the plug button to
the left side of the fresh food door. NOTE:
Use a flat plastic edge to prevent damaging
the door. Remove any adhesive on the door
with a mild detergent. Remove the paper
covering on the adhesive backing on
the logo badge prior to carefully attaching
the badge to the door.
Installation Instructions
Badge
A
B
Mounting
Fasteners
(appearance may vary)
B
Badge
A
(appearance may vary)
REMOVE THE FREEZER DOOR HANDLE
7
Stainless steel and plastic handles:
Loosen the set screws located on the
A
underside of the handle with the 1/8ʺ Allen
wrench and remove the handle.
NOTE: If the handle mounting fasteners need
to be tightened or removed, use a 3/16ʺ Allen
wrench.
59
A