Removing The Freezer Drawer - GE Cafe CFCP1NIXSS Owner's Manual And Installation Instructions

REMOVING THE FREEZER DRAWER

The freezer drawer can be removed, if needed,
to fit through tight areas.
Read these instructions completely and carefully.
1 REMOVE THE BASKET
A Open the freezer drawer until it stops.
B
Cut the 2 wire ties off of the basket with
wire cutters.
C The freezer basket rests inside 4 tabs on
the freezer slides. Lift the basket up and
out of the 4 tabs.
D Tilt the front up and lift the entire basket
up and out of the drawer.
REMOVE THE DRAWER FRONT
2
FROM THE SLIDES
A Remove the 10 hex head screws from the
door and remove the door.
DO NOT remove the torx screws
from the rail assemblies.
DO NOT remove
torx screws
Rail Assembly
B Set the drawer front on a non-scratching
surface.
C Push the rail assemblies back into the
cabinet.
Installation Instructions
A
25
(on some models)
REMOVE THE BASE GRILLE
3
(if needed)
If, after removing the freezer drawer and
refrigerator door, the refrigerator will still
not fit through a doorway, the base grille
can be removed.
A
Remove the base grille by removing the
2 Phillips head screws.