Honeywell Bendix/King KX 165A Maintenance Manual page 84

BENDIX/KING
2. LOC Deflection
Tone Ratio
0.093 ddm (+4 dB)
150 Hz
predominant
0.093 ddm (+4 dB)
90 Hz predominant
3. LOC Alarm
Input a standard -73 dBm LOC signal into the unit with a 0.000 ddm modified as follows:
a.
Internal Display
External Indicator drive
b.
Internal Display
External Indicator drive
c.
Internal Display
External Indicator drive
4. LOC Composite Level
Input a standard LOC centering signal at -53 dBm RF level with the 90 Hz tone turned off.
Composite Level Set: ______________ VACRMS (.272
Page 5-36
TEST DATA SHEET
Deflection Internal CDI
Polarity
Left ____ Indicator within 3rd
bar left of center
Right ____ Indicator within 3rd
bar right of center
Standard Composite Signal
________ "FLAG" not displayed
________ Voltage across Flag outputs.
90 Hz only on composite
________ "FLAG" displayed
________ Voltage across Flag outputs.
150 Hz only on composite
________ "FLAG" displayed
________ Voltage across Flag outputs.
15610M00.RCD
External Indicator Drive
Positive voltmeter lead
Connected to +RIGHT
____ -90 ±6.3 mV
____ +90 ± 6.3 mV
Positive lead connected to +FLAG output.
NLT 350mV & NMT 900mV
Positive lead connected to +FLAG output.
NMT 125mV
Positive lead connected to +FLAG output.
NMT 125mV
±
0.005)
KX 165A
Rev 0, Jun/2000