Honeywell Bendix/King KX 165A Maintenance Manual page 83

BENDIX/KING
Note1: (within 1 increment from center position).
*7. NAV Audio Output: _____________ VRMS (7.07 VRMS Min - into a 500Ω load)
Input a -73dBm standard audio signal into the unit. Adjust the volume control to full
clockwise.
8. Minimum NAV Audio Output: _________________ VRMS (.02 VRMS Max - into a
500Ω load)
Input a -73dBm standard audio into the unit. Adjust the volume control to full coun-
terclockwise.
9. Audio Frequency Response:
Input a -73 dBm RF signal into the unit with the volume knob at the 12 o'clock
position. Monitor the Audio Output level as the modulation frequency is varied.
1kHz
350 kHz
2500kHz
10. Voice/Ident: ______ dB (15 dB Min)
Input a -73dBm 30% mod at 1020 Hz into the unit. Monitor receiver audio level
while pulling ident filter switch.
E. LOCALIZER RECEIVER
1. LOC Centering
Input a standard -73 dBm LOC signal into the unit with a 0.000 ddm.
Internal CDI position __________ Within 1 increment of center position.
External Indicator drive _________ Voltage across D-Bar outputs NGT ±5mV
Rev 0, Jun/2000
Ref. 0 dB
____________ dB (6dB Max)
____________ dB (6dB Max)
15610M00.RCD
KX 165A
Page 5-35