Honeywell Bendix/King KX 165A Maintenance Manual page 81

BENDIX/KING
C. VOR deflection (internal CDI)
Set the generator to the 0° from radial. Note a centered VOR deflection.
Change the units OBS setting to that indicated below and confirm the deviation
indicated.
OBS 350°
OBS 10°
D. Digital VOR Bearing
Observe the bearing radial in the VOR Bearing mode (Ref. fig. 3-5; TO indica-
tion) and in the VOR Radial mode (Ref. fig. 3-7; FROM indication).
ERROR LESS THAN 2°
RADIAL
0°
30°
60°
90°
180°
270°
Rev 0, Jun/2000
TEST DATA SHEET
_________________ Deviation output within 1 increment of full
scale right.
_________________ Deviation output within 1 increment of full
scale left.
BEARING
DISPLAY
(TO)
_________
_________
_________
_________
_________
_________
15610M00.RCD
RADIAL
DISPLAY
(FROM)
_________
_________
_________
_________
_________
_________
KX 165A
Page 5-33