computer and video
connectors
power
switch
power
cord
connector
Usage Guidelines
Do not look directly into the projection lens when the projector
•
is turned on. The bright light may harm your eyes.
Do not block the grills on the projector. Restricting the air flow
•
can cause it to overheat and turn off. If this happens, you must
wait a minute before attempting to turn it back on.
Handle the projector as you would any product with glass
•
components. Be especially careful not to drop it.
Avoid leaving the projector in direct sunlight or extreme cold
•
for extended periods of time. If this happens, allow it to reach
room temperature before use.
Transport the projector in a vendor-approved hard or soft case.
•
Part numbers for these cases are listed on page 37.
If You Need Assistance
The first place to look for help is in this manual. Be sure to check
the guidelines in "Troubleshooting" on page 32.
Please contact your Toshiba dealer for details.
zoom ring
focus ring
keypad
security lock
F
2
IGURE
Side view of projector
3