M
a
i
n
t
e
32
n
a
n
c
e
&
Troubleshooting
Problem: The projector is not running
Make sure that the power cord is properly connected to a fully
•
functional AC electrical outlet. Make sure that the power cord
is also properly connected to the projector.
If the projector is plugged into a power strip, make sure the
•
power strip is turned on.
Make sure the projector is turned on.
•
Problem: Projector is running, but nothing appears on projec-
tion screen
Make sure you have removed the lens cap on the projection
•
lens at the front of the projector.
Check the projector's lamp to ensure that it is securely con-
•
nected in the lamp module. Make sure the lamp access grill is
installed. See "Replacing the Projection Lamp" on page 27.
Problem: Only the start-up screen displays
Verify that the cables are connected correctly. See page 7 for
•
connection procedures.
Make sure that the cables do not have any bent pins.
•
Verify that the proper input source is connected. See
•
"SOURCE" on page 14.
You might need to turn everything off and power up the
•
equipment again in the proper order. Refer to your com-
puter's documentation to determine the correct order.
Make sure your laptop's external video port is turned on. See
•
the "Portable and Laptop Activation Chart" on page 38 or
your computer's manual for details.
Make sure your computer's video board is installed and con-
•
figured correctly.
Make sure your computer has a compatible video board. The
•
projector isn't CGA or EGA compatible.
T r
o
u
b
l
e
s
h
o
o
t
i
n
g