Table of Contents
Advertisement
U
s
i
n
g
t
NOTE: The color setting applies
to video sources only. The tint
setting applies to NTSC video
sources only.
18
h
e
P
r
o
Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
1 Highlight Contrast, press
DECREMENT
to accept your changes.
Tint
The tint adjusts the red-green color balance in the projected
image.
1 Highlight Tint, press
buttons to adjust the tint, then press
MENT
your changes.
Color
The color setting adjusts a video image from black and white to
fully saturated color.
1 Highlight Color, press
buttons to adjust the color, then press
MENT
your changes.
Blank screen
Blank Screen determines what color is displayed when there is no
active source and when the projector is in standby.
1 Highlight Blank screen, press
DECREMENT
and white, then press
j
e
c
t
o
r
SELECT
buttons to adjust the contrast, then press
SELECT
SELECT
buttons to cycle through the options blue, black,
SELECT
, use the
INCREMENT
, use the
INCREMENT
SELECT
, use the
INCREMENT
SELECT
, use the
SELECT
INCREMENT
.
and
SELECT
and
DECRE-
to accept
and
DECRE-
to accept
and
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
