Using The Remote Control - Toshiba TDP-P4 User Manual

U s i n g t
12
h e P r o
The projector is equipped with a self-locking, quick-release eleva-
tor foot and button.
To raise the projector:
1 Press and hold the elevator button (Figure 9).
2 Raise the projector to the height you want, then release the
button to lock the elevator foot into position.
F 9
IGURE
Adjusting the height of the projector

Using the Remote Control

To control the computer's mouse from the projector's remote or
keypad, you must connect the mouse connector on the computer
cable to the computer. See page 7 for details.
The projector ships with a remote that has four function buttons,
a disk mouse and two mouse buttons, one on the top of the
remote and one on the bottom.
Point the remote control at the projection screen or at the front of
the projector (not at the computer). The range for optimum oper-
ation is about 25 feet. If you point the remote at the projection
screen, the distance to the screen and back to the projector must
be less than or equal to 25 feet. For best results, point the remote
directly at the projector.
j e c t o r
elevator button
(under finger)
elevator foot