Toshiba TDP-P4 User Manual page 23

U s i n g t
NOTE: The Manual Sync,
Manual Tracking, Horizontal
Position and Vertical Position
options are available only for
analog computer sources. The
projector sets these options
automatically for digital computer
and video sources, with no manual
20
h e P r o
Manual Sync
The projector adjusts signal synchronization automatically for
most computers. But if the projected computer image looks fuzzy
or streaked, try turning
image still looks bad, try adjusting the signal synchronization
manually:
1 Turn Auto Image off.
2 Highlight Manual sync, press
DECREMENT
sharp and free of streaks, then press
Manual Tracking
The projector adjusts tracking automatically to match the video
signal from your computer. However, if the display shows evenly
spaced, fuzzy, vertical lines or if the projected image is too wide
or too narrow for the screen, try turning
on again. If the image is still bad, try adjusting the tracking man-
ually:
1 Turn Auto image off.
2 Highlight Manual tracking, press
and
fuzzy vertical bars are gone, then press
Horizontal Position
Follow these steps to manually adjust the horizontal position:
1 Turn Auto image off.
2 Highlight Horizontal position, press
MENT
tion, then press
override.
Positioning adjustments are saved when you turn off the projec-
tor.
Vertical Position
Follow these steps to manually adjust the vertical position.
1 Turn Auto image off.
2 Highlight Vertical position, press
and
press
Positioning adjustments are saved when you turn off the projec-
tor.
j e c t o r
Auto image
buttons to adjust Manual sync until the image is
buttons to adjust Manual tracking until the
DECREMENT
and buttons to adjust the Horizontal posi-
DECREMENT
.
SELECT
buttons to adjust the Vertical position, then
DECREMENT
.
SELECT
off then back on again. If the
use the
,
SELECT INCREMENT
.
SELECT
off then back
Auto Image
use the
,
SELECT INCREMENT
.
SELECT
use the
,
SELECT
use the
,
SELECT INCREMENT
and
INCRE-