Cleaning The Bar And Chain; Cleaning The Spark Plug; Cleaning The Air Filter - Stihl MS 194 T Instruction Manual

English

15.2 Cleaning the Bar and Chain

► Shut off the engine and engage the chain brake.
► Remove the bar and chain.
1
► Clean the oil inlet hole (1), oil port (2) and bar groove (3)
with a soft brush or STIHL resin solvent.
► Clean the saw chain with a soft brush or STIHL resin
solvent.
► Mount the bar and chain.

15.3 Cleaning the Spark Plug

► Shut off the engine and engage the chain brake.
► Allow chainsaw to cool down.
1
2
► Rotate the shroud lock (1) a half turn counterclockwise.
► Remove the shroud (1).
► Pull off the spark plug boot (3).
28
3
3
2
3
► If area around the spark plug is dirty: Clean it with a damp
cloth.
► Unscrew the spark plug.
► Clean the spark plug with a damp cloth.
► If the spark plug is corroded: Install a new spark plug.
► Fit the spark plug and tighten it down firmly.
► Press the spark plug boot (3) firmly home.
► Place the shroud (1) in position.
► Rotate the shroud lock (2) clockwise until you hear a click.
The shroud lock (2) is secure.

15.4 Cleaning the Air Filter

15.4.1 Cleaning the fabric air filter
► Shut off the engine and engage the chain brake.
► Rotate the shroud lock (1) a half turn counterclockwise.
15 Cleaning
3
1
3
2
0458-568-0121-A