Transporting; Transporting The Chainsaw; Storing; Storing The Chainsaw - Stihl MS 194 T Instruction Manual

13 Transporting

13 Transporting

13.1 Transporting the Chainsaw

► Shut off the engine and engage the chain brake.
► Fit the scabbard so that it completely covers the guide bar.
► Carry the saw by holding the top handle in your left hand
with the guide bar pointing to the rear.
► Transporting the saw in a vehicle: Secure the saw to
prevent turnover and movement.
1
The chainsaw can be carried by attaching the ring (1) to your
waist belt or a rope.

14 Storing

14.1 Storing the Chainsaw

► Shut off the engine and engage the chain brake.
► Fit the scabbard so that it completely covers the guide bar.
► Observe the following points when storing the saw:
– Saw is out of the reach of children.
– The saw is clean and dry.
If you store the saw for more than 3 months:
► Remove the bar and chain.
► Open the fuel tank cap.
0458-568-0121-A

15 Cleaning

15.1 Cleaning the Saw

► Shut off the engine and engage the chain brake.
► Allow chainsaw to cool down.
► Clean the saw with a damp cloth or STIHL resin solvent.
1
► Clean cooling air slots with a soft brush.
► Rotate the shroud lock (1) a half turn counterclockwise.
► Remove the shroud (2).
► Remove the chain sprocket cover.
► Use a soft brush, damp cloth or STIHL resin solvent to
► Clean the area around the sprocket with a damp cloth or
► Place the shroud (2) in position.
► Rotate the shroud lock (1) clockwise until you hear a click.
► Fit the chain sprocket cover.
► Drain the fuel tank.
► Close the fuel tank.
► Have fuel tank cleaned by a STIHL servicing dealer.
► Start the engine, engage the chain brake and run the
engine at idling speed until it stops.
clean the inside of the shroud.
STIHL resin solvent.
The shroud lock (1) is secure.
English
1
2
27