Preparing Engine For Start; Starting The Engine - Stihl MS 194 T Instruction Manual

English
When can the engine be started without preparation?
The engine can be started without preparation if it has been
running for at least 1 minute and only shut down for a short
work break.
► Start the engine.
9.2

Preparing Engine for Start

► Select the correct starting procedure.
► Engage the chain brake (1).
► Pull off the chain guard (scabbard).
► Press the manual fuel pump bulb (6) at least ten times.
► Press down the throttle trigger lockout (3) and hold it
there.
► Pull the throttle trigger (4) and hold it there.
► Move the Master Control lever (2) to position
► Release the throttle trigger (4) and lockout lever (5).
► Move the choke lever (5) to position
20
1
2
3
4
5
6
.
.
► Stand the saw on a level surface.
► Hold the saw firmly with your right hand on the top handle
– wrap your thumb around the handle.
► Press the saw against the ground with your right hand.
► Hold the saw steady with your right knee on the shroud.
► Pull the starter grip slowly with your left hand until you feel
it engage.
► Pull the starter grip quickly and allow the starter rope to
rewind several times until the engine fires and stops.
► Move the choke lever (5) to position
9.3

Starting the Engine

► Select the correct starting procedure.
► Engage the chain brake (1).
► Pull off the chain guard (scabbard).
► Move the choke lever (5) to position
9 Starting and Stopping the Engine
.
1
2
3
4
5
6
.
0458-568-0121-A