Working - Stihl MS 194 T Instruction Manual

English
￭ The saw can be damaged if it is run on a fuel mixture
consisting of unsuitable gasoline or an unsuitable two-
stroke engine oil or if an incorrect mix ratio of gasoline and
two-stroke engine oil is used.
► Mix the fuel as described in this instruction manual.
￭ The mixture of gasoline and two-stroke engine oil can
separate if it is stored for a long period. The saw can be
damaged if it is used with a fuel mix that has separated.
► Before refueling the saw: Thoroughly mix the fuel.
► Use a mixture of gasoline and two-stroke engine oil that
is not older than 30 days (STIHL MotoMix: 2 years).
4.8

Working

4.8.1 Cutting
WARNING
￭ Always work within calling distance of others in case help
is needed.
► Make sure than persons outside the work area are
within calling distance.
￭ If the engine is not started properly, the user may lose
control of the chainsaw. This can result in serious injuries.
► Start the engine as described in this instruction manual.
► If the saw chain is touching the ground or objects: Do
not start the engine.
￭ The user cannot concentrate on the work in certain
situations. The user can lose control of the saw, stumble
or fall and be seriously injured.
► Work calmly and carefully.
► If light and visibility are poor: Do not use your saw.
► Operate the chainsaw alone.
► Do not work above shoulder height.
► Watch out for obstacles.
► If you begin to feel tired: Take a break.
10
￭ When working in a tree there is risk of the saw falling to
the ground. This can result in serious injuries and damage
to property.
► Secure the chainsaw with a rope tied to the ring.
￭ Exhaust gas is produced when the engine is running.
Breathing in exhaust gas can have toxic effects.
► Avoid inhaling exhaust gas.
► Operate the chainsaw is a well ventilated location.
► In the event of nausea, headache, visual disturbances,
problems with hearing or dizziness: Stop work and seek
medical advice.
￭ The user's ability to hear and assess noises is restricted
when wearing hearing protection with the engine running.
► Work calmly and carefully.
￭ The user will not be able to control the chainsaw properly
if it is operated with the Master Control lever in
position . This can result in serious injuries.
► Check that the Master Control lever is in position
during operation.
► Start the engine as described in this instruction manual.
￭ Do not accelerate the engine with the chain brake
engaged since this can damage the chain brake.
► Disengage the chain brake before you start cutting.
￭ The rotating saw chain can cut the operator. This can
result in serious injuries.
► Do not touch the rotating saw chain.
► If the saw chain is blocked by an object: Shut off the
engine and engage the chain brake. Then remove the
object causing the blockage.
￭ The rotating chain becomes hot and expands. If the chain
is not lubricated sufficiently or not re-tensioned at regular
intervals, it may come off the guide bar or break. This can
result in serious injuries and damage to property.
► Use special chain oil.
► Check oil level in tank regularly during cutting work.
Before the oil tank runs empty: Fill up with chain oil.
4 Safety Precautions
0458-568-0121-A