Mounting The Power Tilt 1/2 - R82 buffalo English Manual

1
A
2
3
G
B
GB
This is to show how you mount Power Tilt on a
standard Buffalo. Power Tilt is only available for
Buffalo size 2 & 3.
1) In order to attach the control box, fasten the
plate in the holes. Then attach the control box
to the plate.
A = power cable (220 V)
B
B = remote control cable
2) Dismount the bar for the manual tilt at the top.
Use an Allen key and a 13 mm fork wrench.
3) Then dismount the bar for the manual tilt
below. Use an Allen key and a 13 mm fork
wrench.
12
MountinG tHe power
tilt 1/2