Vinten Vision 250 E Maintenance Manual page 25

Contents
Contents
General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Routine checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Battery replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Adjustments
Brake knob adjustment
Balance mechanism digital display
General
1 The Vision 250 E/IT pan and tilt head is robustly made to high engineering standards and little attention
is required to maintain serviceability save regular cleaning. Attention to the following points will ensure a long
and useful life with minimum need for repair.
Cleaning
2 During indoor use, the only cleaning required should be a regular wipe over with a lint-free cloth. Dirt
accumulated during storage may be removed using a semi-stiff brush. Particular attention should be paid to
the mounting face of the head and to the space between the tilting assembly, the encoders and the base.
3 Use out-of-doors under adverse conditions will require special attention. Salt spray should be washed
off with fresh water at the earliest opportunity. Sand and dirt acts as an abrasive and should be removed using
a semi-stiff brush or vacuum cleaner.
WARNING!: Ensure mains power supply is disconnected before using any fluid
cleaners on the head or interface box.
NOTE: Use only detergent-based cleaners. DO NOT use solvent- or oil-based cleaners, abrasives
or wire brushes to remove accumulations of dirt, as these damage the protective surfaces.
Section 4
Servicing
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
First Previous Next
Page Page Page
Previous
View
Para
25