Vinten Vision 250 E Maintenance Manual page 15

Contents
IT interface box
16 The IT interface box combines the output from the head encoders and the lens zoom and focus
encoders and provides positional data to a virtual set computer. It is connected to a virtual studio systems via
RS-232 (26) or RS-422
17 A pushbutton (23)
purposes.
18 Mains power (100-120 Vac/200-240 Vac, 0.15A, 50-60 Hz) is supplied to the IT interface box via an IEC
connector (22).
19 A BNC connector on the IT interface box is for video synchronization
composite 'black' output from the camera. An LED
synchronization and green when synchronized.
(27) connectors.
provides a 'RESET' command to the virtual studio system for positional reference
(25) adjacent to the connector shows red when out of
First Previous Next
Page Page Page
(24) and is connected to the
Previous
View
15