Vinten Vision 250 E Maintenance Manual page 17

Contents
Mounting the camera
5 Remove the slide plate
release (11) and pulling the plate to the rear.
6 Attach the slide plate to the camera or camera mounting plate under the approximate centre of the
camera's weight using both camera mounting screws (12). Position the screws as far apart as possible.
7 Set the platform level and engage the centre lock (5).
8 Push the slide plate and camera into the platform from the rear, ensuring slide lock release
into position.
9
10
11
12
(13) from the head by releasing the slide plate clamp (1), pressing the slide lock
Fig 2.1 250IT Interconnections
First Previous Next
Page Page Page
AC IN
SYNCH
DATA OUT
Previous
View
(11) snaps
17