Installing The Printer - TEC EM1-33033 Owner's Manual

5. INSTALLING THE PRINTER

5. INSTALLING THE PRINTER
Turn the POWER SWITCH to OFF before connecting the power cord or cables.
Serial I/F Cable (RS-232C)
Expansion I/O Cable (Option)
NOTE: Only the power cord is provided with this product. If using another cable, it should conform to
the following specifications. For more details, please contact your local TOSHIBA TEC
service representative.
Centronics Interface (36 pins, Male)
Printer-Side Connector Pin Signals
Expansion I/O Interface (24 pins, Male)
Printer-Side Connector Pin Signals
WARNING!
Parallel I/F Cable
(Centronics)
Standard: QQ-US
Power Cord
Option: QQ
RS-232C Interface
DB-25S (25 pins, Male,
Metric screw type)
Connector to Printer
PIN No. Signal
1 Shield
2 RXD
3 TXD
4 CTS
5 RTS
6 DTR
7 GND
20 DSR
5-1
EM1-33033
5. INSTALLING THE PRINTER
Fig. 5-1
DB-9P
Connector to PC
PIN No. Signal
1 N.C.
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 N.C.