Installing The Printer; Connecting The Power Cord And Cables; Procedure For Fitting Fan Filter - TEC B-570-QP Series Owner's Manual

5. INSTALLING THE PRINTER

5. INSTALLING THE PRINTER

5.1 Connecting the Power Cord and Cables

Turn the POWER SWITCH to OFF before connecting the power cord or cables.
Serial I/F Cable (RS-232C)
Expansion I/O Cable
Parallel I/F Cable (Centronics)

5.2 Procedure for Fitting Fan Filter

Snap on
When installing the printer, it is important to ensure that the fan filter is attached before using the printer.
The filter comes in 2 parts:
(1) FILTER PAD
(2) FILTER RETAINER
To fit put the filter pad inside the filter retainer and simply press into place according to the diagram above,
ensuring connecting pins are aligned with connecting holes.
WARNING!
Power Cord
Snap on
E5-1
ENGLISH VERSION EM1-33031
5.1 Connecting the Power Cord and Cables
High Speed PC Inter-
face Cable (Option)
Fig. 5-1
Fig. 5-2