Cisco NCS 1002 Troubleshooting Manual page 77

Alarm Troubleshooting
PSU INSERTED Alarm
Default Severity: Minor (MN), Non-Service-Affecting (NSA)
Logical Objects: PSU
The PSU INSERTED alarm is raised on the NCS 1002 when a power supply is inserted to the device.
Clear the PSU INSERTED Alarm
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
PSU REDUNDANCY LOST Alarm
Default Severity: Major (MJ), Service-Affecting (SA)
Logical Objects: PSU
The PSU REDUNDANCY LOST alarm is raised on the NCS 1002 when a power supply is removed.
Clear the PSU REDUNDANCY LOST Alarm
The alarm clears when a power supply is inserted on the NCS 1002
If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical Support
Website at http://www.cisco.com/c/en/us/support/index.html
en/us/support/web/tsd-cisco-worldwide-contacts.html
your country.
REMOTE-FAULT Alarm
Default Severity: Major (MJ), Service-Affecting (SA)
Logical Objects: CLIENT
The REMOTE-FAULT alarm is raised on the NCS 1002 when a remote fault character sequence is received
in the incoming MAC stream as defined in IEEE 802.3.
Clear the REMOTE-FAULT Alarm
Step 1
Verify and resolve the client port fault and remote fault errors on the remote or upstream node.
Step 2 Verify and resolve loss of signal synchronization error on the remote or upstream node.
http://www.cisco.com/c/en/us/support/index.html
for more information or log into
to obtain a directory of toll-free Technical Support numbers for
Troubleshooting Guide for Cisco NCS 1002, IOS XR Release 6.3.x
PSU INSERTED Alarm
http://www.cisco.com/c/
67