Verifyingtheperformancemonitoringparametersofcontrollers - Cisco NCS 1002 Troubleshooting Manual

General Troubleshooting
12 49 195.55 1533.073
----------------------------------------------------
13 48 195.50 1533.465
----------------------------------------------------
14 47 195.45 1533.858
----------------------------------------------------
15 46 195.40 1534.250
----------------------------------------------------
16 45 195.35 1534.643
----------------------------------------------------
17 44 195.30 1535.036
----------------------------------------------------
18 43 195.25 1535.429
----------------------------------------------------
19 42 195.20 1535.822
----------------------------------------------------
20 41 195.15 1536.216
----------------------------------------------------
<snip>

VerifyingthePerformanceMonitoringParametersofControllers

Performance monitoring (PM) parameters are used by service providers to gather, store, set thresholds for,
and report performance data for early detection of problems. The user can retrieve both current and historical
PM counters for the various controllers in 15 minutes and 1 day intervals.
show controllers controllertype R/S/I/P {pm {current | history}
| fec | otn} linenumber }
For Ethernet controllers, only ingress statistics are supported.
Note
The following sample output displays the current performance monitoring parameters of the Optics controller in 15 minute
intervals.
Example:
RP/0/RP0:ios# show controllers optics 0/1/0/0 pm current 15-min optics 1
Tue Feb 10 14:59:06.945 UTC
Optics in the current interval {14:45:00 - 14:59:05 Tue Feb 15 2015]
Optics current bucket type : Valid
MIN
LBC[mA] : 735
OPT[dBm]:-1.23
OPR[dBm]:-1.07
The following sample output displays the historical performance monitoring parameters of the Ethernet controller in 24
hour intervals.
Example:
RP/0/RP0/CPU0:ios# show controllers HundredGigECtrlr 0/0/0/11 pm current 24-hour ether
Thu Nov 12 04:16:40.598 UTC
ETHER in the current interval [00:00:00 - 04:16:40 Thu Nov 12 2020]
AVG MAX Threshold(Min) TCA(enable) Threshold(Max) TCA(enable)
735 735 0
-1.23 -1.23 2.5
-1.07 -1.07 -23.98
Verifying the Performance Monitoring Parameters of Controllers
{15-min | 24-hour} {optics | ether
NO 0
NO 3.5
NO -7.5
Troubleshooting Guide for Cisco NCS 1002, IOS XR Release 6.3.x
NO
NO
NO
29